Simon Hahnel - Channel
-
Mini Hexacopter Frame Build. Plywood DIY project for FPV. 1806 Motors and 5x45 Props
Esc have not arrived for my ZMR430 Frame so I am starting my Mini Hex. I will use my ZMR250 parts... -
Y6 TRIcopter Dragonfly Build Part1 The Frame and motors
I have not gone into detail on the mounting of the motors as I did this in detail on my Wooden H ... -
Y6 TRIcopter Dragonfly Build Part 2. ESC Wiring Loom and First Flight
All finished and in the air. Not sure if it will ever be much better than this flight but I will ... -
Deadcat 500 Quadcopter. How to build a cheap Deadcat 500 (SK450) frame.
I have been wanting to make a Deadcat quadcopter for a while now but had not got around to orderi... -
Multirotor Compilation - Spyder Hex, S550 Hex, S500 Quad, ZMR and Tarot 250 Quad, DIY Projects
I looked at my builds for the last 6 months and thought it was time to load up a compilation of m... -
Turnigy MultiStar 30 Amp ESC SimonK Flash firmware to fix sync issues. Work great now.
So these ESCs and Motors have been a Journey over 12 months. ESCs need SimonK upgrade or they are... -
Turnigy MultiStar Suicide 450 Quadcopter 30 Amp ESC and Motors finally Flying with SimonK firmware
I have now managed to flash 4 Multistar ESCs with SimonK firmware. 3 are SBECs and one is an OPTO... -
Turnigy MultiStar Suicide 450 Quadcopter 30A ESC SimonK 690kV Motors KK2.1HC. First Full Flight.
After many ESC changes and disasterous crashes I finally have these ESCs and Motors sorted. Fly b... -
Rotate your KK2.1 flight controller 90 Degrees for neater cable layout KK2.0 KK2.1HC KK2.1.5
Demonstration of the new RC911 Firmware for the KK2.1 which enables the rotation of the KK2 for 9... -
Q330 Quadcopter Frame Review and Build with 2826 and 1806 motors. Bixler 2 intro
Quick Review on the Q330 Quadcopter frame. Determine which motors and Propellers to use. -
Tarot FY680 Hexacopter MultiWii PRO First Flight and Parts List
Tarot FY680 Frame Turnigy Multistar 3508-640Kv 14Pole Multi-Rotor Outrunner Motors Afro 30A ESC w... -
APM Arducopter 2.6 on my SK450 Testing. Total Fail. Crash and still flies with bent Props.
I had this controller running perfectly the previous night. RTL. Loiter. All great. Today Total f...