Durafly SLOWPOKE 1200mm Maiden flight! From HobbyKing

Link to the Slow Poke at HobbyKing:
Follow on Facebook:
Flown with a Turnigy Graphene 3s 2200 :
Durafly Slow Poke! Be sure to watch the Unboxing and Building video too! Super fast and easy to assemble.
Maiden flight thoughts, best takeoffs for me were just bring it above idle to roll straight, then punch it. Landings, slow it down as much as possible in a nice big flare. Its a shorter coupled plane so keep that in mind.
It did knife edges no problem! There is a little coupling, but that's normal in almost all planes. I do need to add a scarf to the pilot though, that would look great! The Slow Poke is a very predicable plane to fly, flies nice slow, and flies nice fast too!
In the next video, you'll see some grass operations, it does great on the grass, and is more fun for me to fly off grass. Its big wheels work great on that terrain!
Be sure to SUBSCRIBE so you don't miss more action!
Thanks GBLynden for the video help.
The Durafly SlowPoke is an EPO foam model of the classic design. Adding to the easy flying design of the SlowPoke, Durafly has added some larger wheels to make it even easier to take off and land on a wide variety of fields. A great plane for your first low wing tail dragger or for the discerning experienced pilot wanting a great looking, easy flying plane.
The large wing makes for easy flying right down to walking pace landings. The power plant (3648 700KV motor and 40A ESC) provides all the power you need. All the 9g servos are all pre-fitted for ease of building. The ball links on the control surfaces make for smooth and precise control for the best realistic flights.
Like all Durafly planes, building takes next to no time. The extra smooth EPO foam provides an outstanding look and when you include the rigging wires, dummy plastic motor, cockpit detail and pilot they provide that extra realistic look. The SlowPoke is a plane you can’t walk past without turning your head.
So be the first at your field to enjoy flying the Durafly SlowPoke.
Features:
• Easy to build from smooth, lightweight and durable EPO.
• Plug and Fly format, simply add your own radio system and battery (not included)
• High level of prefabrication, requires only minutes to assemble
• Extremely gentle flight characteristics, especially in slow flight
• High-quality paint finish
• Dummy model engine for added realism
• Strong, fully molded plastic cowl
• Easy and direct access to battery and radio compartment
• Full 4 channel control: Elevator, rudder, throttle and aileron
• Preassembled undercarriage with large wheels
• Ball Links on all controls
Specs:
Wingspan: 1200mm
Length: 940mm
Flying weight: 1380g
Motor: 3648 700KV brushless outrunner
ESC: Aerostar 40A w/XT60
Prop: 12x8”
Servos: 9g x 4
Recommended:
Your own minimum 4 channel transmitter and receiver
2200mah~2700mAh 3S lipo battery