Futaba 9C fault diagnosis
Sorry this video didn't turn out as well as I'd hoped but my external microphone developed a problem part-way through.
I took a look at this Futaba 9C to try and track down a fault that affected the aileron channel. Turns out that there was noise appearing on the signal line from the pot(entiometer) on the stick unit.
Often, noise like this indicates a dirty pot which can be replaced or cleaned -- however, not this time. When I disconnected the pot and substituted two fixed-value resistors instead, the noise was still there. This indicates that the circuit (the ADC) which converts the voltage from the stick into a binary value is likely to be faulty. In its "noisy" state, the ADC no longer passes changes in stick-voltage to the CPU so the aileron channel no longer functions or functions only slightly.
Since this was just a "quick look", I didn't take the logic board out or investigate further. If the owner wants, I will continue the diagnosis but that won't be for a week or so, due to other commitments.
I took a look at this Futaba 9C to try and track down a fault that affected the aileron channel. Turns out that there was noise appearing on the signal line from the pot(entiometer) on the stick unit.
Often, noise like this indicates a dirty pot which can be replaced or cleaned -- however, not this time. When I disconnected the pot and substituted two fixed-value resistors instead, the noise was still there. This indicates that the circuit (the ADC) which converts the voltage from the stick into a binary value is likely to be faulty. In its "noisy" state, the ADC no longer passes changes in stick-voltage to the CPU so the aileron channel no longer functions or functions only slightly.
Since this was just a "quick look", I didn't take the logic board out or investigate further. If the owner wants, I will continue the diagnosis but that won't be for a week or so, due to other commitments.
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.