Please help us to find bad videos. Broken or unappropriated video content?
Lumenier Micro Lux F4 V2 Catalyst Machine Works Superlight 4R Build and Maiden flight!! This is my new build and maiden of the Lumenier Micro Lux F4 V2 Catalyst Machine Works Superlight 4R. At 162mm, 4 inch it was a smooth build, Tango Dos flies great adn look really snazzy!! details below.
FRAME ONLY!!
Catalyst Machine Works Superlight 4R Link:
30.5 to 20mm Adapter
The 4 inch FPV racing revolution is coming. The SuperLight 4R is here to lead the way. This craft is a departure from conventional thinking with regard to what is possible from a 4 inch racer. It is also a departure from conventional thinking with regard to the proper electronics setup to get the most out of this little beast. Please review our RCGroups discussion about the 4R below and also pay close attention to the required electronics setup link below. Yes, a 4 inch craft can be faster than a 5 inch.
FEATURES:
Thrust/weight equal to a 5" craft but DRASTICALLY reduced overall mass
Sub 150 gram AUW (no lipo) possible
Tough as nails
167mm XL frame geometry
Easy to build
Easy to maintain
4mm removable arm braces included in the kit
2.5mm and 3.5mm main frame plate options available
Runcam Micro swift / Foxeer Micro mount included
Fits 'standard sized' electronics
Knurled black anodized standoffs (27mm long)
Multiple Vtx / FPV antenna mounting options
Innovative Vtx / FPV antenna mount made of flexible TPU.
Catalyst Machineworks unmatched quality materials
Catalyst Machineworks unmatched quality fasteners
Catalyst Machineworks unmatched performance
Catalyst Machineworks unmatched customer support
SPECS:
38 grams (2.5mm option)
49 grams (3.5mm option)
AUW possible: below150 grams (no lipo)
Material: Twill Weave 3K Matte CF
Bottom plate: 2.5mm or 3.5mm
Top plate: 1.5mm
Mini camera side brace plates: 1.5mm
Arm braces: 4mm
Frame Type: XL
Frame Size: 167mm
Max camera angle: 65 degrees
Lipos supported: 3s, 4s, 5s, 6s
Lipo mounting position: Bottom
Fits 4" props
Supported FPV Cameras: Runcam Swift Micro, Foxeer Micro, or similar
Optional FPV Camera: HS1177 with optional camera mounting parts (sold separate)
Ideal Motor: 1407 or similar (2mm mounting screws)
Oversized Motor: 1806 or 22xx size (3mm mounting screws)
(All Internal Parts)
Lumenier Micro Lux F4 V2 Link:
The Lumenier MICRO LUX V2 F4 Flight Controller with OSD brings incredible power and performance to the micro brushless world. It uses a powerful F4 processor along with top of the line hardware. Now you can get all the performance from an F4 based flight controller in a micro size! The V2 now includes an on-board Betaflight OSD. Using an On Screen Display has never been simpler, just drag and drop in the Betaflight Configurator. This flight controller uses 20x20mm mounting holes and a low profile design allowing for smaller airframe designs than ever before. The MICRO LUX V2 comes with BetaFlight pre-installed.
The MICRO LUX supports both SBUS and PPM inputs as well as DSM/DSMX receivers with both 5v and 3.3v support.
Software/Hardware Features
2-4S Direct Lipo input support (5-16v)
On-board BetaFlight OSD
On-board 5v/2A and 3.3v/0.2A regulators
SBUS and PPM support
RGB LED dedicated pad, Current Sensor pad and Buzzer Pad
VBAT Monitoring support
3x UART Ports
Betaflight support (Supports new DSHOT protocol)
BLHeli passthrough flashing supported by hardware
Specifications
STM32F405 (2MB flash) 32-bit processor
MPU6000 Gyro/Accelerometer
High quality 1.6mm PCB
Micro USB connector for programming
Dimensions: 27x27x6mm (includes USB in height)
Mounting Holes: 20mm square to center of holes
Weight: 4g
Music purchased for use from Epidemic Music
Song Title: The Way We Roll
Artist: Kalle Engström feat. Hayley
link:
My Links
Please Subscribe!
Join Fullscreen, INC the best Youtube MCN
My Instagram: /
MyTwitter:
MySpace:
Add me on Google+:
My Youtube Channel:
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.