A friend asked me to make him a hot stamp for his logo. Here you see set the file up in VCarve. I use a 1/16 cutter to take out the majority of the back ground material, In 3 passes at a depth of .02 each pass. I use a 1/4" brass plate I bought at a scrap metal place. The small letters in the next file pass were cut with a 90 degree V cutter.
------------------------------------------------------------
Visit us on the web!
Go to a Maker Faire!
Check out the Maker Shed!
Subscribe to the Magazine!
Follow us on Twitter:
Instagram: /
Facebook:
Pinterest: /
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Enduro Rally 2021 - Pabradė military base
Dirt bike and quadbike event at Crazy Ferma 2022-02-06
Deathstroke 3d printed wearable mask #shorts