Pro-Line Pro-Spec 1/10th Buggy Shocks - From Bag to Buggy

Pro-Line Racing makes some of the best shocks on the planet! After the huge success of the PowerStroke line of shocks and then the race inspired Pro-Spec for SCT, Pro-Line has released the Buggy version now.
Want to save some hard earned CASH???
Use coupon code "RCNetwork10" and save 10% off your order at
/
Get the freshest goods shipped straight to your house! For The RCNetwork Subscribers only!!!
In this video, I'll show you what you get in the bag and how it installs on one of my 1/10th scale 4wd buggies. The buggy versions do not include a spring, but is compatible with any 12mm big bore shock from all the major companies. I used a custom set from Avid RC found below. Although originally planned for my Hot Bodies D413, these found their way on my Team Associated B44.3
Here's where I got my Pro-Spec shocks and sone info from Pro-Line Racing:
Fronts: /
Rears: /
Avid RC Front Spring Set:
Avid RC Rear Spring Set:
This is a Pro-Spec Shock Kit for 1:10 buggy Rear. The next generation of Pro-Line Shock Technology has arrived: Pro-Line Pro-Spec Shocks for 1:10 Buggies! Every last detail has been refined to give you the best performing and best looking Shocks ever made. The Pro-Spec Shocks are a 12mm Big Bore design with a Single Low Friction X-Ring Seal. The Pistons and Shaft Guides are made from Silky Smooth White Delrin for Low Stiction and the 3.5mm thick Shock Shaft is Hard Chrome Coated, just like full scale racing shocks.
The Pro-Spec Shocks feature an easy access Bleeder Cap Screw for consistent shock builds every time. Each pair of Pro-Spec Shocks includes 3 different piston options (1.4, 1.6 & 1.8) and a blank piston for drilling to a custom size. Custom Shock Tightening Tools and optional shock limiters are also included. Pro-Line’s new Pro-Spec Shocks come in kit form with build instructions, so you can build the shocks exactly how you want. Your current 12mm big bore buggy springs bolt right up so you can get exactly the spring rate you are used to. Upper and lower shock pivot balls are included so you can fit a wider range of vehicles right out of the box. Optional +2, +4 and +6mm spring perches are included to fit a wide variety of buggies and shock springs.
Experience the Performance of Pro-Line’s Next Generation Shock Technology for yourself - Get Pro-Spec Shocks!
*Buggy Springs Not Included* - Use any 12mm Big Bore Buggy Spring
Smoothest Shocks Pro-Line has ever made
12mm Big Bore Technology
Single Low Friction X-Ring Seal
Silky Smooth White Delrin Shaft Guides and Pistons
Easy Access Bleeder Cap Screw
Hard Chrome Coated 3.5mm Shock Shaft
Optional Pistons and Limiters Included
Use any 12mm Big Bore Buggy Springs
Pair with the Pro-Spec Front Shocks
Associated B5 & B5m
Associated B44.3 *Unscrew front shock eyelets 3 turns to get stock front length
Kyosho RB6
Kyosho ZX-6 *Limit the front shock droop 1mm and Unscrew rear eyelet 1 turn for stock length
TLR 22 2.0 *Use stock 22 2.0 shock balls in the Front Shocks and Unscrew Front and Rear eyelet 3 turns for stock length
TLR 22-4 *Use #6308-01 or 6308-31 shocks in the Rear with 2mm of limiters to get stock rear shock lengths and use stock 22-4 shock balls in the Rear Shocks
Yokomo B-Max 2 *Unscrew rear shock eyelets 2 turns to get stock rear length
Yokomo B-Max 4
Hot Bodies D413 *Use 6267-01 in the Front with 5mm of limiters and use 6308-01 or 6308-31 in the Rear. Use 2mm spacers on the top of the shocks to get the correct shock angle.