3D Printed FPV Quad Thrust Thoughts and Melting PLA
Here is the heat gun from the video:
Many of you pointed out that using a sledge hammer to hit a nail is overkill. Well that's what I did by 3D printing this motor thrust rig. Turns out all I needed to do was flip the prop upside down and reverse the rotation. Lesson learned. You all were right and so in this video I demonstrate that it does work and then I use my heat gun to melt the PLA rig.
Thanks for all the great feedback. The build is getting close and I'll post an update soon.
Many of you pointed out that using a sledge hammer to hit a nail is overkill. Well that's what I did by 3D printing this motor thrust rig. Turns out all I needed to do was flip the prop upside down and reverse the rotation. Lesson learned. You all were right and so in this video I demonstrate that it does work and then I use my heat gun to melt the PLA rig.
Thanks for all the great feedback. The build is getting close and I'll post an update soon.
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.