The RCNetwork - TrakPower 4s Lipo Unboxing

Here's a look at a TrakPower 4s Lipo Battery. 5600mah with 60c Constant will be a great battery for my new Duratrax 835E 1/8th scale buggy. I picked this up from Tower Hobbies along with the newly released buggy. Here's where I got it and some info from TrakPower:
This is the TrakPower 4S 14.8V 60C 5600mAh Hard Case LiPo Battery
with Dean's Ultra Connector.
FEATURES: Ideal for 1/8 scale off-road applications
ROAR approved
Prewired with Dean's Ultra connector
INCLUDES: 4S 14.8V 60C 5600mAh LiPo Battery with Dean's Ultra Connector
REQUIRES: Balancer and LiPo compatible charger, or LiPo charger with built-in
balancer such as the DuraTrax Onyx 235, DTXP4235
SPECS: Battery Type: Lithium Polymer
Cell Number: 4S
Rated Pack Voltage: 14.8V
Capacity: 5600mAh
Max Recommended Charge Current: 1C (5.6A)
Continuous Discharge: 60C (336amps)
Pack Dimensions: 5.4 x 1.8 x 1.9" (137.54 x 46.98 x 49.04mm)
Weight: 21oz (595.9g)
Discharge Connector: 3.5" (88.9mm) 12AWG leads with Dean's Ultra
Connector
Balance Connector: Standard ElectriFly balance connector
COMMENTS: ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts