Testing RCX 10A ESC (SimonK Firmware) + 1804 2400KV Motor + 5030 2-Blade Propeller #3 MYRCMART.COM

Video Channel
Please help us to find bad videos. Broken or unappropriated video content?
Testing RCX 10A ESC (SimonK Firmware) + 1804 2400KV Motor + 5030 2-Blade Propeller #3 MYRCMART.COM
The test was driven by the following components together with a 3S 11.1V 2200mAh Battery. You can check the voltage, current, watt information on the Wall Mater. You can find all those tools from
Although the motor was hot after 10min of testing, but during and after the test, the 10A ESC was just a little warm. The motor demands like 6.5 - 7.5A current for full load so a good 10A ESC should be able to run this motor pretty good.
RCX 10A ESC Brushless Motor Speed Controller (G Series / Programed for Multicopter - SimonK Firmware)
RCX 1804 (2400KV) Micro Outrunner Brushless Motor (Anti-Clockwise)
EPP Propeller (5030 / Green)
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user, if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.