Wooden 380 H Quadcopter Build Part 5. Review. KK2.1 Hobbyfan 30a ESC
Turns out all I needed to do was Calibrate my ESCs again.
I assumed that as I was using the same ESCs and transmitter it would be fine. BUT, I had swapped the Flight controller from a KK2.1HC to a KK2.1. Lesson Learnt. Flying great now. Liking this frame set up.
DIY 380 H Frame
KK2.1 Flight controller
2212 DJI Clone motors
Hobbyfan 30A ESCs Stock standard
Turnigy 3000mA 3s Battery
All up Weight without battery 748g
I assumed that as I was using the same ESCs and transmitter it would be fine. BUT, I had swapped the Flight controller from a KK2.1HC to a KK2.1. Lesson Learnt. Flying great now. Liking this frame set up.
DIY 380 H Frame
KK2.1 Flight controller
2212 DJI Clone motors
Hobbyfan 30A ESCs Stock standard
Turnigy 3000mA 3s Battery
All up Weight without battery 748g
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.