Turnigy Talon Octocopter First Flight 2836/11 750kV Motors UBEC 30a ESCs KK2.1 Steveis SW 1.12S1
Turnigy Talon Octocopter first flight. First impressions is that is under powered and really needs the 10" Props. Extension boom arms are on order so I can install the larger propellers.
Current configuration is:-
Turnigy Talon Octocopter plates with
V2 Quadcopter boom arms and motor mounts.
Turnigy 2836/11 750kV motors
UBEC 30a ESCs
Turnigy 5000mA 3s Nanotech Lipo
KK2.1 Controller
I had to load Steveis SW 1.12S1 beginner firmware as the default KK2.1 ver 1.6 firmware did not work in octocopter mode. Motors 5 and 6 did not function at all. Poor Form.
Current configuration is:-
Turnigy Talon Octocopter plates with
V2 Quadcopter boom arms and motor mounts.
Turnigy 2836/11 750kV motors
UBEC 30a ESCs
Turnigy 5000mA 3s Nanotech Lipo
KK2.1 Controller
I had to load Steveis SW 1.12S1 beginner firmware as the default KK2.1 ver 1.6 firmware did not work in octocopter mode. Motors 5 and 6 did not function at all. Poor Form.
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.