Pure X Racing Quadcopter Build - Part 4 - Camera Pod, Wrap-Up
If you are planning to build a "Pure X" quadcopter like a Krieger, Mitsuko, Mixuko, or QQ190, the hardest part is getting all the electronics to fit. This video series will show you how to build an electronics module that will easily install into this type of frame.
---
The links below are affiliate links. If you buy anything at all from Atees after using that link, I will get a small commission. Please consider using the below links for a future purchase, to help support the channel.
FrSky X4R-SB -
Shendrones Mixuko -
Littlebee LB20 ESC -
Littlebee LB30 ESC -
If possible, I would suggest using an F390 ESC instead of the LB20 that I am using. The LB20 Pro or the LB30 are both good choices, as well as the DYS XM20.
---
These are not affiliate links, just links to good products that I think are worth using.
RedRotor RROSD -
TS5823 -
HS1177 Camera -
Xracer F303 -
---
The links below are affiliate links. If you buy anything at all from Atees after using that link, I will get a small commission. Please consider using the below links for a future purchase, to help support the channel.
FrSky X4R-SB -
Shendrones Mixuko -
Littlebee LB20 ESC -
Littlebee LB30 ESC -
If possible, I would suggest using an F390 ESC instead of the LB20 that I am using. The LB20 Pro or the LB30 are both good choices, as well as the DYS XM20.
---
These are not affiliate links, just links to good products that I think are worth using.
RedRotor RROSD -
TS5823 -
HS1177 Camera -
Xracer F303 -
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.