HPIGUY | TSX220 Mini Quad (Part1) - Tom Stanton

The TSX is an X frame designed specifically for speed. Originally designed around a 4s 1800mAh li-po, the frame is roughly the size of an average 180 yet it accepts larger props!
It has an integrated power distribution board (PDB) for easy installation of electronics. The PDB also contains a 5v regulator to power the flight controller and receiver. The frame is cut from 1.5mm matte twill carbon fibre with 3mm arms. This thickness of carbon is combined with nylon standoffs to give a total weight of only 114g for the 250 and 108g for the 220.
The PDB designed by Brett Collis is great, with its 5v BEC and solder pads for your ESC's and battery.
This is Luke Bannister (BanniUK) frame of choice at the moment, winning both days at the UK Drone Nationals.
The 250 is as described with a distance of 250mm from motor to motor and accepts up to 6 inch propellers. The same with the 220 being 220mm motor to motor, however it accepts up to 5 inch propellers.
Purchase link: /
Landing pads by: /
My Instagram:
My Facebook:
Donate to keep the channel going:
Thanks for watching.