How to Flash a Hobby King 20A ESC with simonk
In this video, I go through the steps I used to flash a cheap Hobby King 20 amp ESC with the simonk firmware. The same process can be applied to other ESCs. The simonk firmware is a must to get the most out of your multirotor!
Search for "USBasp Programmer" on google or ebay for the usb programmer/cable required to do the flashing.
This is the command line I used for the flashing:
avrdude -c usbasp -p m8 -U flash:w:bs_nfet.hex
Below are the links I mention in the video:
The thread where I learned how to do it:
The hithub links for the simonk firmware:
Winavr software:
/
My website: /
Search for "USBasp Programmer" on google or ebay for the usb programmer/cable required to do the flashing.
This is the command line I used for the flashing:
avrdude -c usbasp -p m8 -U flash:w:bs_nfet.hex
Below are the links I mention in the video:
The thread where I learned how to do it:
The hithub links for the simonk firmware:
Winavr software:
/
My website: /
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.