Adafruit LED Sequin For FPV Micro Racing Drones. These are good for using Line of Sight Flying for your FPV Micro Racing drone, they only show a single color and they don't have digital control, but that makes them smaller easier to use for many projects. these also will help with flying at night and for finding your FPV Micro Racing Drone in the event of an unscheduled landing or crash.
Simply connect 3 to 6VDC to the + pin and ground to the - pin, and the LED on the board will light up. You can make the LEDs fade and twinkle by using the PWM (a.k.a. analogWrite) functionality of your Gemma or Flora, or just connect directly to a digital I/O pin of a microcontroller to turn on and off. Or even skip the micro altogether, and power directly from a LiPoly or coin battery.
TECHNICAL DETAILS
4mm x 9mm / .16" x .35"
2mm thick
Holes are 7mm / .28" apart
This order comes with 5 Warm White "1206 size" LEDs, matched with a 100 ohm resistor. When powered from 3.3V they draw about 5mA so you can put up to 4 or 5 in parallel on a single microcontroller pin. We also have these sequins in ruby red, emerald green, royal blue, and rose pink.
My Links
Please Subscribe!
Join Fullscreen, INC the best Youtube MCN
MyTwitter:
MySpace:
Add me on Google+:
My Youtube Channel:
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Enduro Rally 2021 - Pabradė military base
#Shorts massive servo wire attack
#shorts SnapMaker J1 IDEX 3d printer creation satisfaction