Bix3 Motor Installation Smallpartscnc Adaptor review
Link to the motor mount from Smallpartscnc.com
*In this video I incorrectly state that the motor is a 2638 size when it is a 2836*
Typically you would need to cut off the top portion of the motor pod to remove the motor and motor mount. Using my method you don't need to cut off the motor pod. You will split the center seam to assist in mount removal. I installed the Turnigy Aerodrive 2836 1500kv motor over the stock smaller 1400kv motor. I wanted a touch more speed and punch. I also installed one of the Hobbyking 40a esc's to handle the extra load. With a 8x6" prop it pulls 31a, a 8x4" pulls 24a.
I'll be doing battery longevity tests between the two props. It's nice to be able to choose efficiency over power.
The main reason for the motor change was the stock motor was horribly out of balance out of the box. I would like it if it was balanced but it's a little under powered if you aim the model 45degrees up for a climb- it peters out...
*In this video I incorrectly state that the motor is a 2638 size when it is a 2836*
Typically you would need to cut off the top portion of the motor pod to remove the motor and motor mount. Using my method you don't need to cut off the motor pod. You will split the center seam to assist in mount removal. I installed the Turnigy Aerodrive 2836 1500kv motor over the stock smaller 1400kv motor. I wanted a touch more speed and punch. I also installed one of the Hobbyking 40a esc's to handle the extra load. With a 8x6" prop it pulls 31a, a 8x4" pulls 24a.
I'll be doing battery longevity tests between the two props. It's nice to be able to choose efficiency over power.
The main reason for the motor change was the stock motor was horribly out of balance out of the box. I would like it if it was balanced but it's a little under powered if you aim the model 45degrees up for a climb- it peters out...
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.