(2/8) APM Mini 3.1 Video Series - Simple step by step power, motor and ESC setup. From Banggood.com

Video Channel
Please help us to find bad videos. Broken or unappropriated video content?
For the complete playlist click here -
Board available from
Anti vibration mount available from
In this second video in the APM 2.X series we look at how to connect the GPS, mount the board, how it’s powered, how to install the motors and calibrate the ESCs and perform a final check to ensure that everything is connected correctly.
We cover what JP2 (Jumper 2) does on the board, options to power the 3.1 and what to do if you can't power your board from the ESC connections.
Then we will look at a top tip about how you can avoid problems with crossed motor connections, how to calibrate the ESCs (using the short and longhand method) and finally a top tip for how to check that he motors are installed perfectly before the first hover test.
Thanks for watching, please LIKE and SUBSCIBE and Happy flying!
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user, if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.