RC ADVENTURES - 1/14th scale 870K Hydraulic Wheel Loader RC4WD

Click Here To Subscribe! ► - Whaaaat? I can't believe my eyes! It has not snowed in September for at least 20 years. Well, no worries - as I am prepared. This is an excellent opportunity to test out the 40 pound Radio Controlled RC4WD Earth Mover 870K Hydraulic Wheel Loader. Work Smarter, Not Harder - I've always said. This is Heavy, WET Snow.. so it needs some power to be moved. With the loader weighing 40lb and the snow being so heavy - I am shocked at how easily the 2 speed transmission powers through.
I needed some high output lights on my loader so I can see what is in front of the loader properly. I picked up these LED lights about 6 months ago, and finally have a good spot for them! I am running them on a direct line to a separate 2200mah 3s Lipo. This way, I get direct current and I am not stealing from the loaders power source. The battery does fit easily along side the 5000mah 3s Lipo I am using to power the loader. Each battery I am using is a GensAce Lithium Polymer (lipo) battery.
The LED Lights I am using are dual RC4WD 1/10 High Performance LED Light Bars. (40mm/1.5") Here is a link:
Specifications:
Cast Molded Housing
Reversible "L" brackets to fit many applications
Adjustable "L" brackets for rotating light
14 Individual LED bulbs
Super Bright Lighting
Vented on side to dissipate heat
Works with up to 11.1v lipo with use of a BEC to regulate voltage below 7.4 volts
Standard Receiver Plug
Connects to extra channel on receiver
2mm Mounting Holes
Overall Length: 2.2in / 56mm
Light Bar Width: 1.57in / 40mm
Overall Height: 0.81in / 20.8mm
Light Bar Height: 0.63in / 16.2mm
Weight: 0.88oz / 25g
The Loader I am using - Here is a link:
Specifications:
CNC Machined Metal parts
Molded Steel bucket
6 channel 2.4Ghz radio
Optimized Steel Hydraulic system
Scale operator station (can fit a driving figure)
Massive 29.5-25L-5 Tires
Reliable hydraulic valve and adjustable pump
Heavy Duty Hoses (OD 4.5mm Nylon, ID 2.5mm)
Powder coated in yellow
Brushless system (hydraulic)
40A brushless ESC with BEC
XXX Kv brushless monster torque Motor
Realistic non functional disk break
Scale ABC plastic interior
Wheel with planetary gearbox build-in
2 speed full metal transmission (1:16 and 1:4 gear ratio)
Realistic fullfull metal Axles
Run time is: XX minutes (XXXXmAh Battery)
Steel Machined oil pump (45mm X 30mm X 15.5mm)
Bucket capacity:
Maximum bucket force: 70kg / 154pounds
Driving Speed: XXX meter per hour
Scale: 1 : 12
Length: 741mm / 29inch
Width: 276mm / 11inch
Height: 276mm / 11inch
Maximum bucket Height: 461mm / 18inch
Maximum bucket up and down angle: 46 to 64 degrees
Maximum bucket left and right angle: 38 degrees
Wheel base: 284mm
Dead Weight: 20.5kg / 45lbs
Total mass load: 32kg / 70lbs
Operating oil pressure: 20Bar, 290psi
Manufactured by JDCustoms
30 days limited warranty
RC ADVENTURES™/ RCSparks Studio™ © 2014 Medic Media Productions Inc.. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world — is strictly prohibited without the prior written consent of Medic Media Productions Inc. Please note that the RCSparks Studio does not sell RC Products. The RCSparks Studio an independent promotor of a great hobby! I am not directly affiliated with any of the vendors or manufacturers in this video. The RCSparks Studio is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the RC ADVENTURES film series broadcast on YouTube is intended for entertainment purposes only. #RCAdventures #Modellbau #Winter #KidSafe #FamilyFriendly #RCTrucks #Tutorial #RC #Action #RadioControl #RemoteControl #RCSparks #Snow #RCToy