Tekin Redline Gen3 Motor - Unboxing / Weight Compare to Gen2
Smaller, Lighter, Faster! Tekin has given us all three in one tiny package in the all new Tekin Redline Gen3 Brushless Senored motor. Huge improvements size and weight, the new Gen 3 Redline will deliver on the racetrack time and time again!
Want even more of The RCNetwork? Follow me/Like me on these platforms:
/
/
Here's where I got it and some info from Tekin:
Tekin’s third generation motors are re-engineered from the ground up resulting in a smaller, lighter and faster sensored motor. On Road or Off, the new GEN3 handles the task in stride, delivering the smooth power across all RPMs that you’ve come to expect from a Tekin motor. Much more than a re-hash and new look, the GEN3 Redline Sensored Motor is now ready for any situation and able to create the speed you need to win.
The GEN3 21.5T, 17.5T and 13.5T are available in an RPM version as well as the standard versions. Designed for applications where higher RPM is more beneficial than torque, these motors are perfect for 1/12 and touring car racing classes.
The GEN3 modified group of motors are custom tuned with rotor sizes to give you the performance needed for your application. The 21.5T down to 8.5T group come standard with 12.5mm performance rotors and the 7.5T to 2.5T group are equipped with a 13mm rotor for that extra torque needed in modified racing.
Input Voltage: 2S - All
3S - 10.5 and up
Weight: 158g / 5.6oz
Shaft Dimensions: 3.2mm (1/8") x 15.3mm
Motor Diameter: 35.85mm / 1.40"
Motor Length: 48.5mm / 1.909"
Bearing Dimensions: Front: 4x13x5mm / Rear: 1/8x3/8x5/32"
Rotor Size: 12.3mm - 25.5T
12.5mm - 21.5T rpm* / 17.5T rpm / 13.5T rpm /
21.5T / 17.5T / 13.5T / 10.5T / 9.5T / 8.5T
13mm - 7.5T / 6.5T / 5.5T / 4.5T / 4T / 3.5T / 2.5T
Rebuildable: Yes
CNC Machined T 6061 Billet Aluminum Heat Sink Can
Neodymium Sintered Magnet
Precision Engineered for Maximum Energy Conversion
High Purity Copper Windings Maximize Conductivity
Low Resistance, High Power Solder Tabs
Dual-Plug Sensor Wire Harness for all Sensored and Sensorless systems
Anodized End-bell plates maximize corrosion and wear resistance
High RPM precision bearings
Rebuild-able Design
Solder-less Sensor PCB replacement
Adjustable Timing
Standard and RPM versions
Want even more of The RCNetwork? Follow me/Like me on these platforms:
/
/
Here's where I got it and some info from Tekin:
Tekin’s third generation motors are re-engineered from the ground up resulting in a smaller, lighter and faster sensored motor. On Road or Off, the new GEN3 handles the task in stride, delivering the smooth power across all RPMs that you’ve come to expect from a Tekin motor. Much more than a re-hash and new look, the GEN3 Redline Sensored Motor is now ready for any situation and able to create the speed you need to win.
The GEN3 21.5T, 17.5T and 13.5T are available in an RPM version as well as the standard versions. Designed for applications where higher RPM is more beneficial than torque, these motors are perfect for 1/12 and touring car racing classes.
The GEN3 modified group of motors are custom tuned with rotor sizes to give you the performance needed for your application. The 21.5T down to 8.5T group come standard with 12.5mm performance rotors and the 7.5T to 2.5T group are equipped with a 13mm rotor for that extra torque needed in modified racing.
Input Voltage: 2S - All
3S - 10.5 and up
Weight: 158g / 5.6oz
Shaft Dimensions: 3.2mm (1/8") x 15.3mm
Motor Diameter: 35.85mm / 1.40"
Motor Length: 48.5mm / 1.909"
Bearing Dimensions: Front: 4x13x5mm / Rear: 1/8x3/8x5/32"
Rotor Size: 12.3mm - 25.5T
12.5mm - 21.5T rpm* / 17.5T rpm / 13.5T rpm /
21.5T / 17.5T / 13.5T / 10.5T / 9.5T / 8.5T
13mm - 7.5T / 6.5T / 5.5T / 4.5T / 4T / 3.5T / 2.5T
Rebuildable: Yes
CNC Machined T 6061 Billet Aluminum Heat Sink Can
Neodymium Sintered Magnet
Precision Engineered for Maximum Energy Conversion
High Purity Copper Windings Maximize Conductivity
Low Resistance, High Power Solder Tabs
Dual-Plug Sensor Wire Harness for all Sensored and Sensorless systems
Anodized End-bell plates maximize corrosion and wear resistance
High RPM precision bearings
Rebuild-able Design
Solder-less Sensor PCB replacement
Adjustable Timing
Standard and RPM versions
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.