Freewing F22 Raptor FLIGHT 6s 6200 pack from Motion RC F-22

Get one here at MotionRC:
Follow on Facebook: www.facebook.com/JohnVHRC
Battery I used:
Receiver I used:
Best flying EDF! This flight is with a 6200 6s lipo link: I just cant wait until the next nice day to fly it again!!
Be sure to watch my unboxing and build videos for the specifics, but I went with the throws by the book, I flew it on high rates only and never flipped off of them. The LemonRX 7 channel stabilized was flawless, I had the gyros set at about 35% and its perfect.
I flew 3 flights today, one 6000mah, one 4200 mah and one 4000mah, and it was amazing each time!! Set at 3 min timer, is perfect for my style of flying.
I was comfortable with it on the first downwind, a few clicks of trim and it was doing great. Tracks like an arrow, landings are so easy! Plenty of power and speed from the 6s setup. Im very happy with it!
For CG I went with the recommended 150mm, I may have even been 155mm, and Im not going to change it from that, as you can see from the video, its dialed in!! Let me know what you think!
Please Subscribe!!
The Freewing F-22 is available in two PNP versions. The Standard version features a 90mm EDF with an all-new 9 blade single piece impeller, factory balanced for precise operation, paired with a 3748-1750kV outrunner brushless motor and 130A ESC. The Deluxe 8S version features a 90mm 12 blade impeller, also molded as a single unit and factory balanced, mounted to a powerful 4075-1390kV inrunner brushless motor and 150A ESC. The F-22’s maximum level airspeed has been measured at 170KPH / 106MPH and 190KPH / 119MPH between the Standard and Deluxe versions, respectively.
FEATURES:
Model officially licensed by Lockheed Martin
Exceptional low speed stability and high speed agility
Realistic Scale Maneuver capability includes Cobra, Mongo Flip, J-Turn, Descending Spiral, Hover, etc
Efficient, balanced, powerful 9-Blade EDF power system
Has the lowest stall speed and one of the highest top speeds among all of Freewing’s jets
Large battery bay to easily fit either 6S or 8S battery (for appropriate 6S or 8S Power System)
Materials include EPO foam, aluminum, carbon fiber, steel, nylon, plastic, and wood for maximum durability
Features a mixture of sharp panel lines, graduated paintwork, and realistic decals for maximum realism
MultiShade™ livery incorporating paint and decals with over 12 different colors and subtle shading in metallic, satin, and matte finishes
Servos are housed within plastic trays for easy removal and servicing
Cockpit is lined with thin plastic to resist heat damage
Grass-capable suspension landing gear and sequenced nose gear doors with magnet assist
Free downloadable 3DPUP Sets including Cockpit Set and Static Display Weapons Bay Set (see the Support Tab for download details)
Main wings disconnect conveniently with a flexible ribbon wire cable, which smartly reduces the load exerted on the actual electronic connections
Magnetic nose cone encased in molded plastic with raised surface details can be removed easily to reduce the model’s length during transport to your flying field
MFCB for wire organization and future expansion-potential with LEDs and optional accessories
Widened gear stance and larger-than-scale grass-appropriate wheels greatly improve ground handling on short grass runways
Ball Bearing-supported horizontal stabilators
Screw-assembly for all flying surfaces
Capable of Expert-level maneuvers as well as smooth, stable slow flight for less-experienced jet flyers
INCLUDES:
Freewing F-22 Raptor 90mm EDF Jet - PNP
9-Blade EDF power system (installed)
3748-1750kV outrunner brushless motor (installed)
130A ESC with EC5 connector (installed)
Electronic retractable landing gear (installed)
Servos, LED Lights (installed)
REQUIRES:
6 Channel radio - select a minimum 6 channel radio from our Radio Collection
6 Channel receiver - select a minimum 6 channel receiver from our Receiver Collection
6 Cell 22.2V 5000 mAh LiPo battery with EC5 connector - we recommend the Admiral 6 Cell 5000 mAh LiPo with EC5 connector
6 Cell compatible battery charger - select a minimum 6 cell (6S) charger from our Charger Collection
Model Scale
1 : 13 Scale
Wingspan
1060mm / 41.73in
Length
1500mm /59.05in
Empty Weight
2960g / 104.41oz (w/o battery)
CG (Center of Gravity)
150mm (5.9") from the leading edge of the wing at the root
Power System
6S 3748-1750kV Brushless Outrunner Motor
Electronic Speed Control
130A, EC5 Connector
Propeller / EDF
90mm 9-Blade EDF
Electronic retractable main gear and steerable nose gear with all metal shock absorbing struts
Required Battery
6S 22.2V 5000mAh LiPo with EC5 connector (required)
Required Radio
6 Channel (required)
Material
EPO Foam
Skill Level
Intermediate/Advanced/Expert
Build Time