RC ADVENTURES - Earth Digger 4200XL Excavator
Click Here To Subscribe! ► - Nothing like a Fresh Dig early in the morning! Just transporting some dirt with my Digger and Tonka truck.. I LOVE RC !!
I run the excavator on a GensAce 8500mah 3s Lipo - High Output. The Run time is approximately 1/2 Hour.
You can find Radio Control Construction equipment like the ones in this video at:
Here is some information on the Stock Excavator (Before Upgrades):
Specifications:
100% CNC machined aluminum (except track and hydraulic pump)
Custom 8 channel 2.4Ghz radio
High Intensity Light (Super bright) (3 Watt)
Optimized steel hydraulic system
Scale operator station (can fit a driving figure and seat)
Steel molded tracks (50mm width, 45 grade carbon steel)
Efficient under carriage with tracks
Reliable hydraulic valve and adjustable pump
Heavy duty hoses (OD 4.5mm Nylon, ID 2.5mm)
Bearing based undercarriage design
Undercarriage rotate 360 degrees (endless)
Powder coated in yellow
Massive brushless system (hydraulic)
125A brushless ESC with BEC
350Kv brushless monster torque motor (4130 OutRunner, 6mm shaft)
Neodymium magnets
Belt/track is track is controlled individually
Run time is: 40-50 minutes (6500mAh battery)
Steel machined oil pump (45mm X 30mm X 15.5mm)
Digging force: 15kg/33pounds
Driving speed: 310 meter per hour
Scale: 1:12
Dig depth: 495mm/19.4inch
Height of cabin: 155mm/6.1inch
Length: 1.15meter/45inch
Width: 250mm/9.8inch
Height: 840mm/33inch
Deadweight: 20kg/44lbs
RC ADVENTURES™/ RCSparks Studio™ © 2014 Medic Media Productions Inc.. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world — is strictly prohibited without prior the written consent of Medic Media Productions Inc. Please note that the RCSparks Studio does not sell RC Products. The RCSparks Studio an independent promotor of a great hobby! I am not directly affiliated with any of the vendors or manufacturers in this video. The RCSparks Studio is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the RC ADVENTURES film series broadcast on YouTube is intended for entertainment purposes only.
I run the excavator on a GensAce 8500mah 3s Lipo - High Output. The Run time is approximately 1/2 Hour.
You can find Radio Control Construction equipment like the ones in this video at:
Here is some information on the Stock Excavator (Before Upgrades):
Specifications:
100% CNC machined aluminum (except track and hydraulic pump)
Custom 8 channel 2.4Ghz radio
High Intensity Light (Super bright) (3 Watt)
Optimized steel hydraulic system
Scale operator station (can fit a driving figure and seat)
Steel molded tracks (50mm width, 45 grade carbon steel)
Efficient under carriage with tracks
Reliable hydraulic valve and adjustable pump
Heavy duty hoses (OD 4.5mm Nylon, ID 2.5mm)
Bearing based undercarriage design
Undercarriage rotate 360 degrees (endless)
Powder coated in yellow
Massive brushless system (hydraulic)
125A brushless ESC with BEC
350Kv brushless monster torque motor (4130 OutRunner, 6mm shaft)
Neodymium magnets
Belt/track is track is controlled individually
Run time is: 40-50 minutes (6500mAh battery)
Steel machined oil pump (45mm X 30mm X 15.5mm)
Digging force: 15kg/33pounds
Driving speed: 310 meter per hour
Scale: 1:12
Dig depth: 495mm/19.4inch
Height of cabin: 155mm/6.1inch
Length: 1.15meter/45inch
Width: 250mm/9.8inch
Height: 840mm/33inch
Deadweight: 20kg/44lbs
RC ADVENTURES™/ RCSparks Studio™ © 2014 Medic Media Productions Inc.. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world — is strictly prohibited without prior the written consent of Medic Media Productions Inc. Please note that the RCSparks Studio does not sell RC Products. The RCSparks Studio an independent promotor of a great hobby! I am not directly affiliated with any of the vendors or manufacturers in this video. The RCSparks Studio is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the RC ADVENTURES film series broadcast on YouTube is intended for entertainment purposes only.
Fpvracer.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.