Durafly SLOWPOKE 1200mm Unboxing and Assembly Review

Link to the Slow Poke at HobbyKing:
Follow on Facebook:
Here it is!! The Durafly Slow Poke! This is the unboxing portion, and assembly. I go through step by step and we build the slow poke. It has some great looks, and its very well built, It builds SO FAST!
I found it easier to balance upside down, and I did have to adjust one aileron servo horn one tooth over. Other than that, it was an easy build that was fun.
Be sure to SUBSCRIBE as the flying video will be coming SOON!!
The Durafly SlowPoke is an EPO foam model of the classic design. Adding to the easy flying design of the SlowPoke, Durafly has added some larger wheels to make it even easier to take off and land on a wide variety of fields. A great plane for your first low wing tail dragger or for the discerning experienced pilot wanting a great looking, easy flying plane.
The large wing makes for easy flying right down to walking pace landings. The power plant (3648 700KV motor and 40A ESC) provides all the power you need. All the 9g servos are all pre-fitted for ease of building. The ball links on the control surfaces make for smooth and precise control for the best realistic flights.
Like all Durafly planes, building takes next to no time. The extra smooth EPO foam provides an outstanding look and when you include the rigging wires, dummy plastic motor, cockpit detail and pilot they provide that extra realistic look. The SlowPoke is a plane you can’t walk past without turning your head.
So be the first at your field to enjoy flying the Durafly SlowPoke.
Features:
• Easy to build from smooth, lightweight and durable EPO.
• Plug and Fly format, simply add your own radio system and battery (not included)
• High level of prefabrication, requires only minutes to assemble
• Extremely gentle flight characteristics, especially in slow flight
• High-quality paint finish
• Dummy model engine for added realism
• Strong, fully molded plastic cowl
• Easy and direct access to battery and radio compartment
• Full 4 channel control: Elevator, rudder, throttle and aileron
• Preassembled undercarriage with large wheels
• Ball Links on all controls
Specs:
Wingspan: 1200mm
Length: 940mm
Flying weight: 1380g
Motor: 3648 700KV brushless outrunner
ESC: Aerostar 40A w/XT60
Prop: 12x8”
Servos: 9g x 4
Recommended:
Your own minimum 4 channel transmitter and receiver
2200mah~2700mAh 3S lipo battery