URUAV UR65 65mm FPV Racing Drone BNF Crazybee F3 Flight Controller OSD 5A Blheli_S ESC 5.8G 25mW VTX - 82.00 €

URUAV UR65 65mm FPV Racing Drone BNF Crazybee F3 Flight Controller OSD 5A Blheli_S ESC 5.8G 25mW VTX
Seller: Banggood,
Free shipping aviable, Registered postage from 25 €

URUAV UR65 65mm FPV Racing Drone BNF Crazybee F3 Flight Controller OSD 5A Blheli_S ESC 5.8G 25mW 48CH VTX

Specifications:
Brand Name: URUAV
Mode Name: UR65
Item Name: 1S 65mm Brushless Whoop racer drone BNF
Wheelbase: 65mm
Size: 81mm*81mm*36mm
Weight: 20.5g(without battery)
Weight:27g(with Original 250mah lipo battery)

SE0603 KV17000 Motor

Mode: SE0603 KV17000
Configu-ration:9N12P
Stator Diamter:6mm
Stator Length:3mm
Shaft Diameter:Φ0.8mm
Motor Dimension(Dia.*Len):Φ9mm*15.5mm
Weight(g):1.8g
No.of Cells(Lipo):1S

Flight controller


Firmware: Betaflight_3.3.0_Crazybee
Betaflight target:
CRAZYBEEF3FR(Frsky version)
CRAZYBEEF3FS(Flysky version)
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Board weight: 3.5 g
Power supply: 1S battery input (DC 3.5-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Frsky receiver with telemetry(D8/D16 switchable)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 14A
Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready
Onboard 4in1 5A ESC

Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Default protocol: DSHOT600

Frsky receiver Version

SPI BUS receiver
Frsky D8/D16 switchable
Compatible both D8 and D16 transmitter
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Flysky receiver Version

SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Failsafe support

AIO Camera&VTX

Output power: 25mw
Frequency: 48CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Camera resolution: 700TVL
Field of view: 120°
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 6 bands 48 channels
With Raceband: 5474 5945 MHZ
Size: 13.9"12.0mm ( L*W )
Weight: 3g

Lipo Battery

Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 60mmx18mmx7mm
Weight: 6.5g
Connector: PH2.0


Features:
Betaflight support , multi flight mode: ACRO/AIR/ANGLE
Powerful Brushless motor and Smooth ESC
Betaflight OSD support ,easy to get RSSI , Voltage and other info from your goggles
Adjust the settings and the PID of the flight controller via OSD
Frsky version support both D8 and D16 Frsky transmitter
Flysky version support both AFHDS and AFHDS-2A protocol transmitter
Full telemetry function ready
Head lights ready
Camera angle adjustable
Real Bind and Fly version

Package Included:

Basic version
1 x 65mm Brushless whoop Frame
1 x Crazybee F3 FC (Frsky and Flysky option)
1 x 5A 4in1 ESC
4 x SE0603 KV17000 Motor
1 x 31mm propeller(4cw+4ccw)
1 x AIO Camera & VTX
1 x 3.8v 250mah 30C/60C battery
1 x USB Lipo/LIHV Charger
1 x Propeller disassemble tool
1 x Screwdriver

Standard version

Notes: Standard version not include Power Adapter, suggest 12V 3A power adapter









More similar


Add Comment