Another fun way to play with brushed Tiny whoop. Let’s rock and drift.. You can also enjoy the FPV Experience with the FPV goggles. These nifty, little conversion kits work with your Tiny whoop electronics to transform it into a fully functional, super-fast hovercraft that works on almost any surface.
Description:
Item Name:Realacc Tiny Whoover EW65 FPV Racer Hovercraft RC Quadcopter
Battery:3.8v 250mah
Motor:615
AIO Camera&VTX:
Output power: 25mw
Frequency: 48CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Camera resolution: 700TVL
Field of view: 120°
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 6 bands 48 channels
With Raceband: 5474 5945 MHZ
Size: 13.9"12.0mm ( L*W )
Weight: 3g
Flight Controller:
CPU: STM32F303CCT6
Six-Axis: MPU6500
ESC: All FETs are rated at 10A maximum
Work voltage: 3.5V-4.35V / 1S Lipo battery input
Firmware Version: BETAFLIGHTF 3.2.0
Firmware Target: Omnibus
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Size: 26mm x 26mm (Fully compatible with the Inductrix quad and Eachine E010/E010S frame and mounting pattern.)
Weight: 3.2g
Receiver option: Frsky 8CH protocol D8 Mode (SBUS)
Flysky 6CH AFHDS 2A protocol (IBUS)
Spektrum DSM2/DSMX protocol
Compatible:
1.Frsky Receiver Support FRSKY X9D/X9D PLUS(D8 mode),and XJT (D8 Mode),DJT DFT DHT Transmitter.
2.Flysky Receiver Support Eachine i6, FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-GT2E, FS-GT2G, FS-GT2F, Turnigy Evolution Transmitter.
3.Spektrum DSM2/DSMX Receiver Support Spectrum/JR(DSM2/DSMX protocol) DEVO10/DEVO 7E(with deviation firmware).
Package Included:
Package Included:
Standard kit included:
1 x Frame Kit set
4 x 0615 brushed motor
4 x 31mm propeller
4 x 31mm propeller
1 x Beecore v2.0 Flight controller (Option: Frsky receiver/Flysky receiver/DSMX receiver)
1 x 3.8v 250mah battery
1 x Battery Cables
1 x Battery Cables
1 x Lipo USB Charger
1 x LED
1 x 3M Double-sided adhesive
Advanced kit include:
1 x 5.8G 48CH 700TVL Camera
1 x Frame Kit set
4 x 0615 brushed motor
4 x 31mm propeller
4 x 31mm propeller
1 x Beecore v2.0 Flight controller (Option: Frsky receiver/Flysky receiver/DSMX receiver)
1 x 3.8v 250mah battery
1 x Battery Cables
1 x Battery Cables
1 x Lipo USB Charger
1 x LED
1 x 3M Double-sided adhesive
