Note : The color choose is the rotor head and tail system ,not the canopy.canopy color may vary, randomly sent
Product:
1.Newly improved flybarless rotor head adopts super-lower CG design, with reduced distance between rotor head and frame, effectively improve rolling, auto-spinning, swaying, etc. 3D performance. The newly designed Linkage rod with reverse thread makes pitch-adjustment be more convenient.
2.Improved side frame design, with dedicated 3GX mounting location. 3GX can be placed in between frames, or behind anti-rotation guide, resulting in clean wire management and improved aesthetics.
3.Unibody main shaft and servo mount, with modified side frame connecting points, simplifying servo replacement and improving ease of maintenance.
4.Longer battery mounting plate with integrated ESC mount.Not only is the battery mount more rigid, the battery can be shifted based on its dimension for better CG. In addition, the screw count has been reduced to minimize assembly and maintenance time.
5.High efficiency tail shaft drive design, dramatically reduce power loss associated with belt driven system, and at the same time increase power output.
6.Vertical rudder servo mount design moving the CG closer to center, improving agility during 3D maneuvers.
7.Unique opposing weighted tail blade grips effectively increase rudder and gyro performance, for superior tail locking and higher precision.
8.New aerodynamic canopy with paint scheme resembling the T-Rex 600E Pro, perfectly matched to the helicopter frame to create aesthetic perfection.
Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.
Length: 638mm
Height: 218mm
Main Rotor Diameter: 710mm
Tail Rotor Diameter: 158mm
Motor Drive Gear: 14T
Main Drive Gear: 150T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Includes ●1* Tarot 450 Pro V2 flybarless kit
●1*carbon blade
- See more at: http://www.hobbywow.com/en-tarot-450-pro-v2-fbl-flybarless-rc-heli-kit-tl20006-p233622.htm#sthash.XpetYSyG.dpuf
Instruction: Specification:
1.Newly improved flybarless rotor head adopts super-lower CG design, with reduced distance between rotor head and frame, effectively improve rolling, auto-spinning, swaying, etc. 3D performance. The newly designed Linkage rod with reverse thread makes pitch-adjustment be more convenient.
2.Improved side frame design, with dedicated 3GX mounting location. 3GX can be placed in between frames, or behind anti-rotation guide, resulting in clean wire management and improved aesthetics.
3.Unibody main shaft and servo mount, with modified side frame connecting points, simplifying servo replacement and improving ease of maintenance.
4.Longer battery mounting plate with integrated ESC mount.Not only is the battery mount more rigid, the battery can be shifted based on its dimension for better CG. In addition, the screw count has been reduced to minimize assembly and maintenance time.
5.High efficiency tail shaft drive design, dramatically reduce power loss associated with belt driven system, and at the same time increase power output.
6.Vertical rudder servo mount design moving the CG closer to center, improving agility during 3D maneuvers.
7.Unique opposing weighted tail blade grips effectively increase rudder and gyro performance, for superior tail locking and higher precision.
8.New aerodynamic canopy with paint scheme resembling the T-Rex 600E Pro, perfectly matched to the helicopter frame to create aesthetic perfection.
Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.
Length: 638mm
Height: 218mm
Main Rotor Diameter: 710mm
Tail Rotor Diameter: 158mm
Motor Drive Gear: 14T
Main Drive Gear: 150T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Includes
●1* Tarot 450 Pro V2 flybarless kit
●1*carbon blade
Note: Not included motor, ESC, motor pinion gear, servo and gyro.
Note:This is original authentic products of Tarot Product
●1*carbon blade - See more at: http://www.hobbywow.com/en-tarot-450-pro-v2-fbl-flybarless-rc-heli-kit-tl20006-p233622.htm#sthash.XpetYSyG.dpuf
1.Newly improved flybarless rotor head adopts super-lower CG design, with reduced distance between rotor head and frame, effectively improve rolling, auto-spinning, swaying, etc. 3D performance. The newly designed Linkage rod with reverse thread makes pitch-adjustment be more convenient.
2.Improved side frame design, with dedicated 3GX mounting location. 3GX can be placed in between frames, or behind anti-rotation guide, resulting in clean wire management and improved aesthetics.
3.Unibody main shaft and servo mount, with modified side frame connecting points, simplifying servo replacement and improving ease of maintenance.
4.Longer battery mounting plate with integrated ESC mount.Not only is the battery mount more rigid, the battery can be shifted based on its dimension for better CG. In addition, the screw count has been reduced to minimize assembly and maintenance time.
5.High efficiency tail shaft drive design, dramatically reduce power loss associated with belt driven system, and at the same time increase power output.
6.Vertical rudder servo mount design moving the CG closer to center, improving agility during 3D maneuvers.
7.Unique opposing weighted tail blade grips effectively increase rudder and gyro performance, for superior tail locking and higher precision.
8.New aerodynamic canopy with paint scheme resembling the T-Rex 600E Pro, perfectly matched to the helicopter frame to create aesthetic perfection.
Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.
Length: 638mm
Height: 218mm
Main Rotor Diameter: 710mm
Tail Rotor Diameter: 158mm
Motor Drive Gear: 14T
Main Drive Gear: 150T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Includes ●1* Tarot 450 Pro V2 flybarless kit
●1*carbon blade
- See more at: http://www.hobbywow.com/en-tarot-450-pro-v2-fbl-flybarless-rc-heli-kit-tl20006-p233622.htm#sthash.XpetYSyG.dpuf
1.Newly improved flybarless rotor head adopts super-lower CG design, with reduced distance between rotor head and frame, effectively improve rolling, auto-spinning, swaying, etc. 3D performance. The newly designed Linkage rod with reverse thread makes pitch-adjustment be more convenient.
2.Improved side frame design, with dedicated 3GX mounting location. 3GX can be placed in between frames, or behind anti-rotation guide, resulting in clean wire management and improved aesthetics.
3.Unibody main shaft and servo mount, with modified side frame connecting points, simplifying servo replacement and improving ease of maintenance.
4.Longer battery mounting plate with integrated ESC mount.Not only is the battery mount more rigid, the battery can be shifted based on its dimension for better CG. In addition, the screw count has been reduced to minimize assembly and maintenance time.
5.High efficiency tail shaft drive design, dramatically reduce power loss associated with belt driven system, and at the same time increase power output.
6.Vertical rudder servo mount design moving the CG closer to center, improving agility during 3D maneuvers.
7.Unique opposing weighted tail blade grips effectively increase rudder and gyro performance, for superior tail locking and higher precision.
8.New aerodynamic canopy with paint scheme resembling the T-Rex 600E Pro, perfectly matched to the helicopter frame to create aesthetic perfection.
Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.
Length: 638mm
Height: 218mm
Main Rotor Diameter: 710mm
Tail Rotor Diameter: 158mm
Motor Drive Gear: 14T
Main Drive Gear: 150T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Includes ●1* Tarot 450 Pro V2 flybarless kit
●1*carbon blade
- See more at: http://www.hobbywow.com/en-tarot-450-pro-v2-fbl-flybarless-rc-heli-kit-tl20006-p233622.htm#sthash.XpetYSyG.dpuf
1.Newly improved flybarless rotor head adopts super-lower CG design, with reduced distance between rotor head and frame, effectively improve rolling, auto-spinning, swaying, etc. 3D performance. The newly designed Linkage rod with reverse thread makes pitch-adjustment be more convenient.
2.Improved side frame design, with dedicated 3GX mounting location. 3GX can be placed in between frames, or behind anti-rotation guide, resulting in clean wire management and improved aesthetics.
3.Unibody main shaft and servo mount, with modified side frame connecting points, simplifying servo replacement and improving ease of maintenance.
4.Longer battery mounting plate with integrated ESC mount.Not only is the battery mount more rigid, the battery can be shifted based on its dimension for better CG. In addition, the screw count has been reduced to minimize assembly and maintenance time.
5.High efficiency tail shaft drive design, dramatically reduce power loss associated with belt driven system, and at the same time increase power output.
6.Vertical rudder servo mount design moving the CG closer to center, improving agility during 3D maneuvers.
7.Unique opposing weighted tail blade grips effectively increase rudder and gyro performance, for superior tail locking and higher precision.
8.New aerodynamic canopy with paint scheme resembling the T-Rex 600E Pro, perfectly matched to the helicopter frame to create aesthetic perfection.
Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.
Length: 638mm
Height: 218mm
Main Rotor Diameter: 710mm
Tail Rotor Diameter: 158mm
Motor Drive Gear: 14T
Main Drive Gear: 150T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Includes ●1* Tarot 450 Pro V2 flybarless kit
●1*carbon blade
- See more at: http://www.hobbywow.com/en-tarot-450-pro-v2-fbl-flybarless-rc-heli-kit-tl20006-p233622.htm#sthash.XpetYSyG.dpuf