SS Series ZTW 40A Brushless ESC 5.5V/4A - 12.66 €

This brushless ESCs uses advanced microprocessor technology. They are designed and manufactured with high quality components which provide exceptional reliability, low internal resistance, and a smooth, linear throttle response. ZTW ESCs are perfectly suited for airplane, helicopter, and multicopter use.

This high power BEC found in ZTW ESCs has been specifically designed for extreme aerobatics and therefore has the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters.

SS Series ZTW 40A Brushless ESC 5.5V/4A

Description:

Item Name: SS Series ZTW 40A Brushless ESC 5.5V/4A
Output: 40A continuous, 60A burst for 10 seconds
Input voltage: 2-6s LiPo; 5-18 cell Ni-XX
BEC output: 5.5V/4A (switching)
Weight: 32g
Dimensions: 52x23x7mm

Features:

1.Easy setup and operation
2.Supports high RPM motors
3.Extremely low internal resistance
4.New advanced programming software  
5.Safety thermal over-load protection
6.Auto detects number of battery cells
7.Super smooth and accurate throttle linearity
8.Auto throttle shut down in case of signal loss
9.Power arming protection (prevents the motor from accidentally running when switched ON)

Programmable Options:

Brake Setting (on/off -- default:off)
Battery Type: (LiPo or NiCd/NiMh -- default: LiPo auto detect)
Low Voltage Cutoff Setting (2.8V/3.0V/3.2V -- default:3.0V)
Factory Default Setup reset
Timing Settings (auto/low 7-22°/ high 22-30°-- default:auto)
Start Up (hard/soft/very soft -- default:soft)
Governor Mode: (off/range 1/range 2 -- default:off)
Motor Rotation: (clockwise/counterclockwise-- default:counterclockwise)
LVC Cutoff Type: (reduce gradually/stop with low throttle rearm -- default:reduce)

Package Included:

1 x ZTW 40A Brushless ESC

Note: All parameters can be programmed using your transmitter, or by using the optional programming card (available separately).

Here is the ZTW 40A ESC Programming Manual