SKYRC RS16 180W/16A Super-compact Portable Balance Charger
Description:
SKYRC RS16 180W/16A Super-compact Portable Balance Charger
Feature:
Compact and Unique Design
The size of RacingStar RS16 is 92*111.4*50mm which is super-compact portable charging system. The joystick gives the user best operational experience and also makes the charger smart and unique.
Two DC inputs
There are two DC inputs, one is located in the right side of the charger and the other is located in the bottom for docking into the eFule 230W 13.8V Switch DC Power Supply(Part No. SK-200017).
Optimized Operating Software
RacingStar RS16 Charger features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!
Internal Independent Lithium Battery Balancer
RacingStar RS16 Charger employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.
Balancing Individual Cells Battery Discharging
During the process of discharging, RacingStar RS16 Charger can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
Adaptable to Various Type of Lithium Battery
RacingStar RS16 charger is adaptable to various types of lithium batteries, such as LiPo, LiIon and the new LiFe series of batteries.
Fast and Storage Mode of Lithium Battery
Purposes to charge lithium battery varies, 'fast' charge reduce the duration of charging, whereas 'store' state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
Cyclic Charging/Discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge > charge is operable for battery refreshing and balancing to stimulate the battery's activity.
Memory Preset
The charger can store up to 5 different charge/discharge profiles for your convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.
Terminal Voltage Control (TVC)
The charger allows user to set the charge/discharge end voltage.
LiPo Battery Meter
The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage.
Re-Peak Mode of NiMH/NiCad Battery
In re-peak charge mode, the charger can peak charge the battery once, twice or three times in a row automatically. This is good for making certain the battery is fully charged, and for checking how well the battery receives fast charges.
Delta-peak Sensitivity for NiMH/NiCad
Delta-peak sensitivity for NiMH/NiCad battery: The automatic charge termination program based on the principle of the delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.
Automatic Charging Current Limit
You can set up the upper limit of the charging current when charging your NiMH or NiCad battery, it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.
Capacity Limit
The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.
Temperature Threshold*
The battery's internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated.
Processing Time Limit
You can also limit the maximum process time to avoid any possible defect
PC Control Software “Charge Master”
There is a micro USB port in the charger which can be used to connect it to the PC. You need optional USB cable (USB A Male to Micro B Male) which is not included in the package. The free “Charge Master” software gives you unparalleled ability to operate the charger through your computer. You can monitor pack voltage, cell voltage and other data during the charging, view charge date in realtime graphs. And you can initiate, control charging and update firmware from “Charge Master”.
When your charger is connected to computer, the “Charger Master” takes over the control of charger. You can control and operate the charger via the “Charger Master” only.
Specifications:
Cooling System:Built-in fan x 1pc
Display Type:2*16LCD
Controls:Joystick
DC input voltage: 11-18V
Charge Current:0.1A-1A(±0.3A) 1A-16A(±10%)
Discharge Current:0.1A-8A(±10%)
Discharge Cut-off Voltage:NiMH/NiCad:0.1-1.1V/cell
LiPo:3.0-3.3V/cell
Lilon:2.9-3.2V/cell
LiFe:2.6-2.9V/cell
Pb:1.8V
Discharge Wattage:30W
Charge voltage: NiMH/NiCad:Delta Peak Detection
LiPo:4.18-4.3mV/cell
Lilon:4.08-4.2mV/cell
LiFe:3.58-3.7mV/cell
Delta Peak Detection:NiMH/NiCad:3-15mV/cell
Reading Voltage Range:0.1-25.8V/cell
Battery Types/Cells:LiPo/Lilon/LiFe:1-6cells
NiMH/NiCad:1-15cells
Pb:2-20V
Battery Capacity Range:LiPo/Lilon/LiFe:100-50000mAh
NiMH/NiCad:100-50000mAh
Pb:100-50000mAh
Current drain for balancing Li-po: 300mA/cell
NiCd/NiMH battery cell count: 1-15cells
Li-ion/Fe/Polymer cell count: 1-6cells
Safety Timer:1-720minuties off
Net weight: 405g
Dimension: 92x111.4x50mm
Case Material:Metal
Package included:
1 x SKYRC RS16 charger
1 x Multiple Balancing Board
1 x DC Input Power Cable
1 x 18AWG Wire Charging Cable
1 x 2S LiPo Hardcase Charging Lead Including Balancing Adapter
1 x English Manual
