KK V5.5 Flight Controller Board V2.9 With Loader USB And ESC Plate - 18.51 €

KK V5.5 Flight Controller Board V2.9 With Loader USB And ESC Plate

Features:
1, the structure is simple, maintenance, debugging easy, low cost
2, the flight control onboard three gyros, relying on potentiometer adjust gyro sensitivity.
3 Servo signal output, support ordinary commodity ESC / analog servo
4, support for single-axis / UFO, Y3 3-axis, Y4-type 3-axis, four-axis, 6 axis, V22 flight mode
5, support for four-axis "and" X "flight mode, support for six-axis" HEXA6 "and" Y6 "flight mode.
6, do not need to MK four-axis PPM decoder board, the receiver can be connected directly to the flight control.
7, 450 handling habits similar to the single-propeller helicopter, mainly rely on manual manipulation, can do a somersault Shuaguo stunts as playing straight the machine mold Friends of the practice machine, after all four axes more than 450 strong.

The USB Firmware Loader / Programmer (USB ASPa) is the hardware utility which can change the flying mode of a KKmulticopter board by re-programming the internal flash of the board.

100% brand new
USB Firmware Loader USBasp Programmer for KKmulticopter Board, connect with the KK Flight control Circuit board directly, It's very convenient for DIY your aircraft.
    
Notice:
that this is not used for parameter adjustment, it's only for flash different firmware of the KK Flight control Circuit board!

Package Include:
1 x KK flight control board
2 x cable
1 x USB burner
1 x ESC web