Specification:
Input voltage: DC10-28V
Charge/Discharge power: 300W/20W
Charge/Discharge current: 0.05-20A
Lipo/Lilo/LiFe: 1-6S
NiCd/NiMH: 1-17S
Lead Acid(Pb): 2-24V
Dimensions: 140x95x27mm
Net weight: 350g
Feature:
1.Support Many Kinds of Battery
The charger can be used with Lipo, Lilo, LiFe, Ni-Cd, NiMH and Pb battery.
2.Flash Storage
The charger has a 16Mbit flash storage,which can log offline charge and discharge data in 36 hours.
3.Unique Lithium Battery Monitor Program
When you use other equipment to charge or discharge a Lithium pack,you can use the charger to monitor the per-cell voltages, battery temperature and process time. If any individual cell appears over-charged or over-discharged or the pack is too hot or the process has gone on for too long,the charge will generate an alarm sound and the related information will blink.
4.Data Storage
Convenient set of 10 battery profile memories that can be saved and loaded by number,
5. Battery Interior Resistance Measurement
The charger can not only measure the internal resistance of the battery pack, and also can measure the per-cell internal resistance (only available for lithium battery).
6.Perfect Protection Function
The charger has protection for reversed polarity(input or output), low input voltage, battery temperature, charging capacity and time overrun.
Packaging included:
1X Thunder 300W 20A charger
