Main Features:
- The 3K full carbon fiber frame features high-intensity and sturdiness.
- The aluminum alloy parts reinforce the arms and make it easy to replace the arms.
- The 4 inch frame has a wheelbase of 180mm.
- The design of "bumper" on the motor mount greatly protects the motor from the impact.
- The strong and beautiful "x" configuration carbon fiber structure has an ultra light weight.
- The angle of the camera mount can be adjusted from 0 - 50 degree.
- Suitable for 95 percent lenses, the camera fixing plate is perfectly compatible with HS1177 and Swift.
- Its PDB includes 5V / 12V BEC ( 3A maximum current at 5V, 500mA at 12V ).
- The 35mm custom aluminum struts are high-intensity anti-slip.
- There are 10 high-lumen LED tail lights on the LED board, and they can be controlled with a jumper cable or the flight controller.
Specifications:
Item: GEP - VX4
Weight: 102g ( including aluminum parts, 2mm top plate )
Wheelbase: 180mmï¼motor to motor, diagonalï¼
Size: 180 x 140mm
Lens angle: 0 - 55 degree
Arm thickness: 4mm
Main board thickness: 2mm
Lateral board thickness: 1.5mm
Recommended parts:
Flight controller: F3 / Naze32 / CC3D
Motor: 2204 / 2205 / 2206
ESC: 20 - 30A
Propeller: 4 inch
Battery: 3 - 4S 1300mAh
- The 3K full carbon fiber frame features high-intensity and sturdiness.
- The aluminum alloy parts reinforce the arms and make it easy to replace the arms.
- The 4 inch frame has a wheelbase of 180mm.
- The design of "bumper" on the motor mount greatly protects the motor from the impact.
- The strong and beautiful "x" configuration carbon fiber structure has an ultra light weight.
- The angle of the camera mount can be adjusted from 0 - 50 degree.
- Suitable for 95 percent lenses, the camera fixing plate is perfectly compatible with HS1177 and Swift.
- Its PDB includes 5V / 12V BEC ( 3A maximum current at 5V, 500mA at 12V ).
- The 35mm custom aluminum struts are high-intensity anti-slip.
- There are 10 high-lumen LED tail lights on the LED board, and they can be controlled with a jumper cable or the flight controller.
Specifications:
Item: GEP - VX4
Weight: 102g ( including aluminum parts, 2mm top plate )
Wheelbase: 180mmï¼motor to motor, diagonalï¼
Size: 180 x 140mm
Lens angle: 0 - 55 degree
Arm thickness: 4mm
Main board thickness: 2mm
Lateral board thickness: 1.5mm
Recommended parts:
Flight controller: F3 / Naze32 / CC3D
Motor: 2204 / 2205 / 2206
ESC: 20 - 30A
Propeller: 4 inch
Battery: 3 - 4S 1300mAh
Specifications
General |
Brand: GEPRC
Type: Frame Kit |
|---|---|
Dimension and Weight |
Product weight: 0.110 kg
Package weight: 0.260 kg Product size (L x W x H): 14.00 x 18.00 x 3.50 cm / 5.51 x 7.09 x 1.38 inches Package size (L x W x H): 20.00 x 10.00 x 3.50 cm / 7.87 x 3.94 x 1.38 inches |
Package Contents |
Package Contents: 1 x Frame, 1 x Pack of Aluminum Fixings, 1 x PDB, 1 x LED Board, 1 x Pack of Screws, 2 x Piece of Stickers, 1 x Camera Mount, 1 x English Manual |
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
