Geprc 20x20mm Stable Flytower Omnibus F4 Integrated with OSD Flight Controller & 12A BL_S DShot600 ESC & 48CH 25/100/200mW VTX
Specification:
Brand Name: Geprc
Model: Stable F4 Mini Tower
Item Name: Omnibus F4 Flight Controller & 12A BLheli_S 4 In 1 ESC & 48CH 25/100/200mW VTX Flytower
Size:27×27mm
Installation height:20mm
Screws:M2×25mm
Mounting Hole: 20x20mm
Recommended the plate thickness: 2-4mm
Weight: 9.5g
48CH Off/25/100/200mW Switchable VTX (Top Level)
48CH Off/25/100/200mW Switchable VTX (Top Level)
VTX Power: OFF/25/100/200mW
CH: 48CH
VTX Power input: 2-6S (using VTX layer alone)
Video Camera Voltage: 5V
Frequency Table:
CH1CH2CH3CH4CH5CH6CH7CH8Band A58655845582558055875586558455725Band B57335752 5771 5790 5809 5828 5847 5866Band C
5705
5740
5362
Omnibus F4 Flight Controller ( Middle Level)
Firmware: betaflight 3.2.1 (OMNIBUSF4SD)
OSD Firmware: Betaflight OSD
Video Camera Voltage: 5V only
Support Voltage monitor, buzzer and LED
Support DSMX, SBUS and PPM Receiver
Board Size: 25×25mm ( 20x20mm Mounting Hole)
Weight: 2.3g
12A BLheli_S 4 In 1 Brushless ESC ( Bottom Level)
Input Voltage: 2-4S (12A)
Con. Current: 12A
Peak Current: 15 (5s)
Oneshot 125/42 : YES
Dshot 150/300/600: YES
BlheliSuite Configurable: YES
Firmware Version: BLHeli_S/Dshot 150/300/600 16.6(G_H_30/L_H_0)
Board Size: 25×25mm
Weight: 2.8g
PDB: Integrated
Battery Monitoring:Integrated
FC Power: Integrated
Features:
- Adopt the current popular tower structure solution, simple installation.
- Fast installation, and very stable.
- Reasonable structure size: 25*25mm*20mm (length * width * height)
- Mounting Hole 20*20mm, suitable for most racks.
- STM32 F405 MCU
- BLHeli_S firmware, Support (Oneshot 125/42 and Dshot 150/300/600 )
- VTX have 48 channel,The power of VTX can choice OFF/25/100/200mW
- Support DSMX , SBUS and PPM Receiver
Pacakage Included:
Pacakage Included:
1x Omnibus F4 Flight Controller
1x 12A BL_S 4 In 1 ESC
1x 48CH 25/100/200mW VTX
1x bag of Screws and Standoffs
1x capacitor
1x Antenna
3x Cable
