Description:
The main module is a 5.8 GHz spectrum scanner with an OLED display. Multiple functions will make your FPV approach completely change.
Designed specifically for the Fatshark Goggles, the 5.8G image transmission receiver module allows you to search for aircraft frequencies immediately after power-up or use the search spectrum function to find an idle channel or directly into your friend's channel.
More than that, you can get a more reliable FPV experience by connecting to the secondary receiver.
Specifications:
Brand Name: GE-FPV
Item Name: RX5808
Type: 2 In 1 Side
Connector: SMA Female
Frequency: 5.8G
Channel: 40
Firmware: laforge V3.3
Display: OLED
Application: Suitable for Fatshark Dominators, Dominator V2, Dominator V3, Dominator HD, Dominator HD V2 Goggles, Attitude V3 needs to be modified before installation.
Function:
- Save Channel
After the startup, the channel and settings are the channels and parameters that have been saved last time.
- Screen Saver
The display shows the current channel, call sign and signal strength.
- Setting Menu
Calibrate the RSSI signal strength, set the call sign (that is, the flyer's own id), frequency rules, and save.
- Quick Save
In manual mode and search mode, hold down the button for two seconds, then let go.
- Status Light
- Status Light
Button status light, signal strength indicator (which is stronger and which side is always on)
- Button
- Button
Up, down, selection / confirmation
- Mode
Favorites mode, manual mode, search mode, scan mode
Note:
When installing the outer casing, you need to insert the receiver into the light-curing casing first, then the casing and receiver are installed together into the goggle.
If you feel it is tight, use a knife to sharpen the four protrusions of the outer casing a little, DO NOT vigorously plug or pull the shell.
Tools & Firmware, Click Here
Package Included:
1x GE-FPV RX5808 5.8G 40CH Diversity FPV Receiver 2 In 1 Side
1x 45 Degree Connector
1x 90 Degree Connector
