GAZ-126 adopts AVCS (ANGULAR VECTOR CONTROL SYSTEM) angle vector control system, lock the tail is more prominent and stable performance , dual sensitivity designed lock gyro.
Description:
Operating voltage : 4V-6V
Size : 27 x 28.5 x18 mm
Operating temperature : -10 --- +45 degrees
Function : with reverse switch , DS mode switch, the delay adjustment control knob to adjust the steering angle of the maximum stroke volume knob on the remote control can be freely adjusted , and the gyro sensitivity switch lock mode (AVCS) and the normal mode
Features:
Status Indicator Display : Indicates the power is turned on , the gyro ongoing data initialization procedure
Steady : gyroscope in lockdown mode
Off: The power is off, or the gyroscope is in the general state
Slow flashing: Gyro can not receiving signal from the transmitter, then the machine can not be operated
Intermittent flashing : The fifth channel is not connected or moved during initialization median,it must remove the power from the new start
Blink twice : 1.it is struck tail rocker Tuo , 2 neutral point of the rudder has been offset must be readjusted to establish the center
The GAZ-126 installed on the helicopter :
When the bottom of the gyro GAZ-126 must be installed at 90 degrees to the spindle with the helicopter , otherwise it will affect the left side of the roll and roll back and forth direction , the GAZ-126 is mounted on an electric helicopter , in order to avoid interference from the motor must be more than 10cm.
Select Servo:
Lock tail gyro performance with the selected rudder servo performance are closely related. Use , it is recommended to use digital servo effect is more significant.
Digital Servo (eg S9253 S9250 S9450) do rudder machine,the beginning of the five modes set to the ON position.
Note: If you use general servo, but puts the beginning of the DS mode cut to the ON position will cause the steering gear to burn.
Check the gyro motion direction:
Lift the nose of the helicopter, the helicopter nose will swing to the left, if the swing direction rudder machine with remote control rudder stick rudder in the same direction, which means that the gyro is set correctly, otherwise switch gyroscope the forward and reverse. Please find problems repeatedly confirmed the correct orientation of the gyroscope.
Maximum range to adjust the rudder machine:
The tail rocker server played left and right camel, camel tail stroke adjustment knob allows the server does not exceed the maximum range of the pitch sleeve activities. In flight, the scope of activities beyond the end of the server does not limit the stroke, you can protect the server and connecting rod, do not adjust the stroke volume is too small lead to reduce gyro performance.
Lock adjustment mode:
When using a digital,please make fine-tuning of the control delay to the position 0, use general servo, adjust the amount of delay from the actual situation.
Package Includes:
1 x GAZ-126 Head Locked Gyro
