| Items | Descriptions | Features |
| R9M Module |
Compatibility : R9 series
Vin Voltage Range:4V-12.6V
External Power Supply: 4V~12V (2s Li-Battery is recommended )
(*3s Li-Battery is not recommended as external power supply, or it will damage)
Telemetry Interface: Smart Port
Upgrade Interface: Smart Port
Modulations: PXX or CPPM (auto-detected)
|
900MHz/868MHz working mode
Long range, low latency and high precision RC system
4 Optional RF power (Non-EU Version)
Telemetry mode (25mW) /non-telemetry mode (200mW / 500mW) (EU Version)
RF Power(Flex):10mW/100mW/500mW/1W (telemetry supported for all levels)
Smart Port enabled and support telemetry data transmission
|
| R9MM Receiver |
Dimension: 16*10*2.8mm (L×W×H)
Weight: 1.1g (including antenna)
Number of Channels:
Non-EU Version: 4/16CH (Telemetry)
EU Version: 4/8CH (Telemetry) / 4/16CH (Telemetry) / 4/16CH (No Telemetry)
Operating Voltage Range: DC 3.5V – 10V
Operating Current: 100mA@5V
Operating Range: Up to 10km or above
Compatibility: R9M and R9M Lite
|
915MHz (Non-EU Version)/ 868MHz(EU Version)
Mini size and super light-weight
Inverted S.Port enabled
S.Port enabled and support telemetry data transmission
(Support F.Port, download firmware to support the function)
Low latency and high precision
With RSSI output in SBUS
Battery voltage detection supported
Detachable Ipex connector antenna
|
| R9 Slim+ Receiver |
Dimension: 32*13.5*5mm (L × W × H)
Weight: 4.3g (with antennas)
Number of Channels:
Non-EU Version: 6/16CH (Telemetry)
EU Version: 6/8CH (Telemetry) / 6/16CH (Telemetry) / 6/16CH (No Telemetry)
With RSSI Output: Analog 0~3.3V
Operating Voltage Range: DC 3.5V~12.6V(3s Li-Battery)
Operating Current: 100mA@5V
Operating Range: Up to 10km or above
Firmware Upgradable
Compatibility: R9M and R9M Lite
|
915MHz (Non-EU Version)/ 868MHz(EU Version)
Performance optimized
2 detachable ipex connector antennas
Small and conveniently setup
Low latency and high precision
Support redundancy function
Smart Port enabled and support telemetry data transmission
Battery voltage detection
With RSSI output
With inverted SBUS and S.Port outputs
|
Package included:
1 x R9M transmitter module
1 x R9MM receiver
1 x R9 SLIM+ receiver
1 x R9MM IPEX 4 T antenna
2 x R9 SLIM+ IPEX 1 T antenna
