CRIUS MWC MultiWii SE V2.5 Control Board W/GPS NAV Module Combo
Crius MWC MultiWii SE V2.5 flight controller board
Features:
• Small size,35x35mm mounting holes
• 6 PWM input channels for standard receiver or PPM SUM receiver
• Up to 8-axis motor output
• Supported 2-axis gimbal and auto trigger controll
• FTDI/UART port for upload firmware, debug, Bluetooth module or LCD display
• I2C port for extend sensor, I2C LCD/OLED display or I2C-GPS NAV board for GPS and Sonar
• Ultra low noise 3.3V LDO voltage regulator
• ATMega 328P Microcontroller
• MPU6050C 6 axis gyro/accel with Motion Processing Unit
• HMC5883L 3-axis digital magnetometer
• BMP085 digital pressure sensor
• PCA9306DP1 logic level converter
Other:
• Dimension: 40mmX40mm
• Height: 11.6mm
• Weight: 9.3g
• Fixing hole spacing: 35mm (It can be changed to 45mm by CRIUS Distribution Board)
• Hole diameter: 3.1mm
Visit Multiwii Website for more detail.
http://www.multiwii.com
NEO-6M GPS Module
Feature:
•U-blox NEO-6M GPS module
•5Hz update rate
•32k I2C EEPROM for save configuration
•Build in 25 x 25 x 4mm ceramic patch antenna
•LNA and SAW chip
•3.3V LDO low noise regulator
•UART (TTL) port with EMI protection
•3V lithium Rechargeable battery
•Power and fix indicator LEDs
•Reverse polarity protection for input power
Default parameter:
•Standard NMEA protocol
•Baud rate : 9600
•Nav rate : 1Hz
•TIMEPULSE (fix LED) rate : 1Hz
Other:
•Dimension: 40 x 40 x 9mm
•Weight: 16.4g/18.6g (include cable)
•Hole diameter: 3.1mm
I2C-GPS NAV Module
Features:
·All GPS data available via the I2C bus to connect to 328P Multiwii FC
·A LED on board show GPS 3D Fix status
·ATMega 328P Microcontroller
·2 Molex 1.25mm 4Pin socket for GPS receiver and FC
·2 port for ISP and FTDI
Other:
·Dimension: 20mmX30mm
·Height: 5mm
·Weight:2.4g/5g(include cable)
·Hole diameter: 3mm
MWC Multiwii Bluetooth parameter debug module / Bluetooth adapter
Features:
·For Multiwii FC Configuration use with Android MultiWiiConfiguration
·UART TTL socket
◆MultiWiiConfiguration function
·Read and Write PID
·Setting switch for AUX1 and AUX2
·Monitor receiver signal and FC output signal
·Monitor All sensors and GPS signal
·Cablibration Magnetometer and Accelerometer
·Save and read profile
◆Default parameter:
·Baudrate : 115200
·Module name : CRIUS_BT
·Pair code : 0000
◆Other:
·Dimension: 15mmX37.5mm
·Height: 5mm
·Weight:2.2g/3.9g(include cable)
·Hole diameter: 3mm
CRIUS CO-16 OLED Display Module
Features:
- High brightness, self-emission, high contrast ratio
- monochrome 128×64 dot
- 5V I2C interface
- Used for telemetry and debug MultiWii FC.
- Dimension: 27mmX27mm
- Height: 6.5mm
- Weight:3.7g/4.9g(include cable)
Package Includes:
1x MWC V2.5 SE Flight Control board
1x I2C-GPS NAV Module
1x NEO-6M GPS Module
1x CO-16 OLED Display Module
1x Bluetooth module