●T-REX 450 has been the ideal choice for entry level R/C helicopters and T-REX 450 PLUS is designed for beginners. The fully assembled helicopter can be flown immediately just by plugging in a charged battery, allowing the pilot to bypass assembly and adjustment process. This T-REX 450 PLUS DFC is a helicopter that utilizing flybarless system.
●The helicopter utilizes DFC rotor head assembly, paired with 3GX MRS flybarless system optimized for T-REX 450 PLUS flight characteristics. Without any adjustment or tuning, this combo will provide optimal stability suitable for pilots of all levels.
For those enthusiasts who wish to fine tune 3GX MRS even further, it can be done through a few simple steps. In addition, 3GX MRS has a FHSS 2.4GHz receiver built in , compatible Spektrum DSM2/DSMX and JR DSM2 satellite receiver, providing an all in one package.
●With the addition of the brand new 3GX MRS, the T-REX 450 PLUS DFC pushes past the performance limitation of flybar helicopter, improving both stability and 3D performance, while maintaining a down to earth price level.
Design Characteristics
Equipped with the low CG DFC rotor head, exhibits New 450DFC CCPM Swashplate and main shaft bearing block
exhilarating 3D performance and unimaginable flight speed.
Brand new battery mount with integrated ESC mount Newly designed servo mount & high precision helical main gear
Newly designed 4 piece upper / lower plate frame system Newly designed rudder servo mount & dedicated rudder
gyro mounting platform
New style frame base plate with access window to Hoop style horizontal fin mount with longer tail boom supports
gyro adjustment
High precision tail pitch control assembly
●RCE-BL35P 35A Brushless ESC x 1
●450MX(3400KV) Brushless motor x 1
●DS415M Digital servo x 3
●DS425M Digital servo x 1
●3GX MRS Flybarless System x 1
Specification:(T-REX 450 Plus DFC BTF)
●Length: 634mm
●Height: 205mm
●Main Rotor Diameter: 715mm
●Tail Rotor Diameter: 158mm
●Motor Drive Gear: 11T
●Main Drive Gear: 112T
●Autorotation Tail Drive Gear: 106T
●Tail Drive Gear: 25T
●Drive Gear Ratio: 1:10:4.24
●Flying Weight: Approx. 584g
●Color carton:27.3x10x6.6cm
●Outer carton:56x31x28cm ,24sets/ctn
Accessories:
●T-REX 450 Plus DFC Kit Set x 1 set
●3GX MRS Flybarless System x 1 set
●325D 3G Carbon blades x 1 set
●RCE-BL35P 35A Brushless ESC x 1 set
●450MX Brushless motor(3400KV) x 1
●DS415M (Metal Gear)Digital servo x 3
●DS425MDigital servo x 1
Radio transmitter and electronic equipment required for assembly:
1.Dial Pitch Gauge or Digital Pitch Gauge
2.Swashplate Leveler
3.3S 11.1V 2000~2300 mAh/30C Li-polymer Battery
4.ALIGN T6 or Futaba S-FHSS 2.4G Transmitter or JR/Spektrum 2.4GHz Transmitter and Spektrum DSM2/DSMX system Transmitter
3GX MRS Programmable Flybarless
System
Specification(3GX MRS) :
●Suitable Voltage Range:DC 3.5~8.4V
●Operating current consumption: X and Y axis Operating Angle Range:-300~+300 degree
●Z axis Operating Angle Range:-600~+600 degree
●Sensor resolution:12 BIT
●Operating Temperature:-20~65 degree
● Current consumption: <[email protected]
● Supports Swash type: 120 degree CCPM swashplate
●Compatible with T-REX 250/T-REX 450/T-REX 500
●Operating humidity:0%~95%
●RoHS certified
●Size:37.6x22.4x13 mm Size
●Weight: 10g Weight
Package Includes:
1 x ALIGN T-REX 450 PLUS DFC BTF