A7105 NRF24L01 PA/LNA 2.4G Wireless Protocol DIY TX Transmitter Module
Description:
Item
Specification
Remark
Supply voltage
2.5V~3.6V
Current consumption
1uA (typical) @Sleep mode
0.3mA (typical) @Idle mode
1.7mA (typical) @Stand-by mode
9mA (typical) @PLL Mode
16mA (typical) @Rx mode
20mA (typical) @Tx mode (Pout = 0dBm)
Frequency
2400 – 2483 MHz
ISM band
Transmit output power
0 dBm @ room temperature
typical
Rx sensitivity
-105 dBm (typical) @ 10Kbps mode, Dev = 40 KHz
-100 dBm (typical) @ 250Kbps mode, Dev = 93 KHz
-96 dBm(typical) @ 500Kbps mode, Dev = 186 KHz
BERâ¦1E-3
Modulation
FSK or GFSK
Transmission distance
About 100meter
BERâ¦1E-3
Interface
8pin 2.54 mm header
Dimension
23.3mm(L) x 12.5mm(W) x 5mm(H)
Not include the connector
Operating temperature
-40 ~ 85 â
Interface:
Pin No.
Symbol
Function Description
Remark
1
GND
Ground
2
Vin
RF Module Supply Votlage Inpute
2.5V--3.3V
3
NC
NO Connection
4
SCS
SPI Chip Selection
5
SCK
SPI Clock
6
SDIO
SPI Data I/O
7
GIO1
GeneralãPurpose I/O1
8
GIO2
General Purpose I/O 2
Features:
XL7105-SY is made by adopting high performance 2.4G wireless transceiver chip A7105 of Taiwan Shengke (AMIC)
Working in 2400-2483M international opened ISM band
The biggest transmission power is 0 dBm(1 mW )500 KBPS
The highest RX sensitivity is -99 dBm @ 250 KBPS,
The distance is as far as 120M
Built-in ID CODE WORD in IC,support CD (carrier detect), FEC error correction
SPI interface, independent 64 bytes RX and TX FIFO.
Cost performance is higher than NRF24L01 and CC2500
Note: this module needs 3.3V power supply, can use voltage chip to reduce the voltage.
Package Included:
1 x Transmitter Module